“Pit Boss It Light Blinking: Enhancing Safety and Convenience. Discover the innovative Pit Boss It Light, a cutting-edge device designed to provide efficient and reliable blinking light signals in various environments. With its user-friendly features and advanced technology, this device ensures heightened safety measures while offering utmost convenience. Explore the benefits of Pit Boss It Light Blinking for your workplace or personal use today!”

REASONS FOR BLINKING AND WHAT YOU CAN DO ABOUT IT

The first reason for the Pit Boss temp light blinking is an inadequate supply of pellets in the hopper. Make sure to use high-quality pellets and add enough to the hopper to maintain a consistent fire.

Another reason for the blinking light is incorrect temperature settings. Familiarize yourself with the different modes and temperatures of the grill, and ensure that you have set it correctly.

A dirty temperature probe can also cause the light to blink. Clean the probe thoroughly to ensure accurate temperature readings.

Blockages in the auger can prevent fuel from reaching the burn pot, leading to low temperatures and blinking lights. Clean out any blockages or debris to resolve this issue.

A failure or slowdown of the auger motor can also cause the temperature light to blink. Check the health of the motor and take appropriate steps to fix or replace it if necessary.

If you have set the temperature too high or in smoking mode, it may be difficult for the grill to reach and maintain that temperature. Adjusting the P setting can help resolve this issue.

See also  Sirloin vs Ribeye: What's the differences?

1. THE HOPPER DOESN’T HAVE AN ADEQUATE SUPPLY OF PELLETS

If the fire on your Pit Boss grill keeps dying out and the temperature light is blinking, it could be due to inadequate supply of pellets in the hopper. Make sure you are using high-quality pellets that burn efficiently. Additionally, ensure that you are adding enough pellets to the hopper depending on how much you are cooking. By maintaining an adequate supply of pellets, you can prevent the temperature from dropping and avoid the blinking temp light issue.

2. TEMPERATURE ADJUSTMENT HAS GONE WRONG

When using your Pit Boss grill, it’s important to properly adjust the temperature settings to ensure accurate cooking. However, if the temperature adjustment has gone wrong, you may experience the temp light blinking issue. This can happen if you have set the temperature too high or if you are using the smoking mode.

To fix this issue, you can adjust the P setting on your grill. This will allow you to set the internal ambient temperature to a level that will prevent the temp light from blinking. If you need to increase the temperature, do so in small increments to ensure that the IT light doesn’t start blinking again once you have reached your desired temperature.

3. TEMPERATURE PROBE IS FAULTY

If your Pit Boss grill’s temperature light is blinking, it could be due to a faulty temperature probe. Over time, the probe can become dirty with grease buildup, leading to inaccurate readings and blinking lights. To resolve this issue, you need to clean the temperature probe thoroughly. By ensuring that the probe is clean and free from any obstruction, it will be able to accurately measure the temperature of your grill, preventing the light from blinking.

See also  Big Green Egg vs Kamado Joe

4. THERE IS A BLOCKAGE IN THE AUGER

Blockage in the auger means that your grill will not receive the fuel it needs to function optimally. This can occur if your pellets have a lot of moisture, if you haven’t cleaned the grill in a while, or if there is ash buildup in the burn pot. Another possible reason could be a broken gear. To address this issue, you will need to diagnose why there is a blockage in the auger and then take the necessary steps to clear it. Thoroughly inspect the auger for any blockages, especially ash buildup or grease around your grill. Taking these small steps will help prevent the temperature light from continuously blinking.

5. FAILURE OF THE AUGER MOTOR

The auger motor is one of the most important components of your pellet grill and smoker that helps feed the pellets from the hopper to the burn pot. However, there can be times when the motor stops functioning, which can lead to a low temperature and cause the temp light to blink. This can also cause the pellet cycle to stop. There are many reasons why the auger motor could fail, such as breakage of the bushing plate or the motor becoming slow. It is important to check the health of the auger motor to determine what steps need to be taken in order to resolve the blinking issue.

6. TEMPERATURE DIAL ISSUES

If you are experiencing issues with the temperature dial on your Pit Boss grill, there are a few possible solutions to consider. Firstly, make sure that the dial is set to the correct temperature setting. Sometimes, the dial can be slightly off and may need to be adjusted accordingly.

See also  Grilling vs Frying: Which Cooking Method is Better for You?

Another potential issue could be a faulty temperature sensor or probe. If you suspect this is the case, try replacing the sensor or probe to see if it resolves the problem.

In some cases, the temperature dial itself may be defective or malfunctioning. If this is the case, you may need to contact Pit Boss customer support for further assistance and potentially have the dial replaced.

FINAL THOUGHTS

 

In conclusion, if you encounter the issue of the Pit Boss temp light blinking, there are several possible causes and solutions. It is important to ensure an adequate supply of pellets to the hopper and use high-quality pellets to avoid the fire dying out. Familiarize yourself with the different temperature modes and set the temperature correctly to prevent fluctuations that may trigger the blinking light. Cleaning and maintaining the temperature probe is crucial to ensure accurate readings and prevent blinking. Additionally, check for blockages in the auger and clean them out thoroughly. The health of the auger motor should also be assessed, as it can impact temperature control. Finally, adjusting the P setting can help achieve the desired temperature without triggering the blinking light.

By following these troubleshooting steps, you can resolve the issue of the Pit Boss temp light blinking and continue enjoying your outdoor cooking experience with confidence.

In conclusion, a blinking light on the Pit Boss grill is a common issue that can be easily resolved. By following the troubleshooting steps mentioned earlier, such as checking for loose connections, ensuring proper power supply, and inspecting the control panel, users can quickly identify and fix the problem. Remember to consult the grill’s manual or reach out to customer support if further assistance is needed.

Learn More About Grilling

If you want to learn more about grilling, check out these other helpful resources!